4 platters how many heads

See Answer. Best Answer. Six heads. There are two heads for each platter. Study guides. Computer Networking 27 cards. What is the most popular way an internal DVD drive interfaces with a motherboard. A DVD can only use the top surface for data. Which holds more data a microdrve or a zip drive.

Computer Networking 28 cards. What is the difference between JPEG and mpeg. Computer Networking 25 cards. Uart in modem. Of ipxspx tcpip and netbeui which is routable and which is not. More answers. Q: If a hard drive has three platters how many heads does it have? Write your answer Related questions. If a hard drive has three platters how manty heads does it have?

If a hard drive has six platters how many head can it have? What are some of the components in a hard drive? If a hard drive have three plattershow many heads does it have? If a hard drive has four platters how many head does it have? A hard drive stores data on? Does a hard drive consists of platters? What are hard drive platters made of? How many individual platters does this hard drive have? Which hard drive type contains spinning platters?

On which physical part of a hard drive is the data stored? What are hard disk cartridge? What is a hard or hard drive? If a hard drive has three plattrs how many heads does it have? How readwrite head work on track and scatoer? An electric motor spins the platters anywhere from rpm to 50, rpm depending on the drive. When reading, the boom moves to the appropriate location and then waits for the data on the platters to pass underneath.

When writing, the boom moves to a location that either contains no data or contains data marked for writing. To make a one, the write heads apply an electric charge to the surface of the platter 5 volts. To make a zero represented by 0 volts , the heads either do nothing or they remove the charge that is there. Hard disks differ from floppies in that the data can be stored in much higher densities and accessed at much higher speeds by using a non-removable disk which is sealed from contaminants.

The platters themselves are usually made of some aluminum alloy coated with a thin layer of iron oxide and are very rigid. A hard disk drive HDD , commonly referred to as a hard drive, hard disk, or fixed disk drive, is a non-volatile storage device which stores digitally encoded data on rapidly rotating platters with magnetic surfaces.

Strictly speaking, "drive" refers to a device distinct from its medium, such as a tape drive and its tape, or a floppy disk drive and its floppy disk. Early HDDs had removable media; however, an HDD today is typically a sealed unit except for a filtered vent hole to equalize air pressure with fixed media.

The platter is made up of a hard material--usually aluminum, but it varies--which is coated by material with a magnetic charge. The magnetic charges record zeros and 1s which can be interpreted as data by the computer.

Each set of magnetic particles is organized in a collection in a unit called a bit. New hard-drive technology uses thin-film metals and glass platters to increase efficiency and drive storage capacity. HeadsThe heads read and write the information to and from the drive platter. Heads are also called read-write heads. The heads write bits of magnetic information onto the platter. The closer the head is to the platter, the more efficiently it is able to read information, but a close-mounted head is more likely to have contact with a platter, potentially damaging the information.

Each platter requires one head for each surface of the hard drive that needs to be read simultaneously by the head. So, if you have a two-side platter in your hard drive, you need two heads to read the sides of the platter. Actuator ArmsThe actuator arm moves the read-write head to the proper area of the platter. The head of a hard drive is mounted on the actuator arm, which moves it in order to correctly read and write the information. The actuator arm also helps keep the head an optimal distance from the hard drive platter to preserve the drive's speed and efficiency and protect the disk.

Actuator MechanismThe actuator mechanism moves the actuator arm into the right place to read and write data to the hard drive platter. A controller directs the actuator to the track which is slotted for the relevant information. Most hard drive manufacturers use either a motor or a magnetic coil to move the actuator arm into place.

Head ParkingHead parking is a vital part of the construction of a hard drive. Head parking maintains the small space between the head and platter, protecting the platter from suffering damage from the head. According to Graves, the head parking acts as a landing zone for the spinning platter for when the computer is powered off.

Head parking can also protect the hard drive when the computer is lightly struck or jarred, but it cannot stop the hard drive from breaking when a severe blow is dealt to the hard drive, like a car accident or an angry kick to the computer. Because inside the case of the hard-drive is a number of thin disks. There could be multiple units of measurement for hard drive speed.

There is the spindle speed, which measures how quickly the hard drive head can spin around the platters. Most modern desktop hard drives spin at 7,RPM. There are higher-end drives that spin at 10, or 15,RPM, but those are primarily for servers. Another unit of measurement for hard drive speed is the interface speed, which is how fast the hard drive can transfer data to or from the rest of the computer.

Log in. Hard Disk Drives. Study now. See Answer. Best Answer. Each platter on a hard drive has 2 heads. At least until some new hard drive Architecture comes into place. Study guides. Q: If a hard drive has four platters how many head does it have? Write your answer Related questions. If a hard drive has six platters how many head can it have?

How do you disable the hard drive in inoperable PC? What is a hard drive disc made of? An information technology journalist since , David Nield writes about the Web, technology, hardware and software. By David Nield. Platters The platters are the circular discs inside the hard drive where the 1s and 0s that make up your files are stored.

The Spindle The spindle keeps the platters in position and rotates them as required. Other Components As well as the casing on the outside of the hard disk that holds all of the components together, the front-end circuit board controls input and output signals in tandem with the ports at the end of the drive.

Computer Hope: Hard Drive.